• evie posted an update 9 months, 3 weeks ago

    As being a tiki bar owner cell phone over Several years We have learned stuff that If only might have done and stuff that I’d personally never do again. I would like to give you my mistakes and improvements to my tiki bar.

    First I would like to discuss several things that we learned building my personal outside bar. Outside, need I believe that more! The elements conditions locally determines how you create your bar. Here are ideas you’ll want to take note of if you’re building a third party tiki bar.

    Your Climate- If you reside in a place which has warm summers and cold winters, you will encounter exactly the same obstacles that we came against. Ensure you use treated wood for any surface which will come in contact with the floor. Unless you follow this rule your tiki bar will quickly shrink and crack. That is why you should use treated lumber; it shrinks less and can last much longer. When you have wood that is exposed to the next thunderstorm you’ll want to pay attention to the sort of wood you utilize and proper treating with the wood after it really is installed.

    Insects- I made use of white cedar logs for your construction of my roof structure because cedar is supposed to be less vulnerable to damage from insects. Okay, throw that out the window, I went along for several years without insect problems until recently. I noticed wood dust and small chips lying on my small bar top. It’s about time coming from thatch falling or breaking up but to my surprise I had created carpenter bees! After inspecting my white cedar logs I ran across holes about 3/8 inch bored in certain of my logs. I knew I had to address it immediately and after doing a bit of research I called an exterminator. A carpenter bee looks almost just like a typical bumble bee except no hair on abdomen and the men’re not able to sting. They love natural cedar! May sure are applying either wood preservative or even a good Valspar varnish to your logs.

    Bar Top- There are numerous opinions as to what for your bar top. Used to skimp here and sorry Used to! It is suggested that you employ marine plywood for your bar top, and even for good reason. I made use of another most sensible thing I believed, oak plywood. The oak plywood was acceptable for the initial couple of years, applying about ten coats of marine varnish. This would be fine except the edges with the plywood are extremely difficult to seal. Once water started engaging in wood I had created nothing but problems! To solve my problem I applied glass tile to my tiki bar top using waterproof glue and grout. The marine plywood is incredibly expensive but worth the money.

    Palm Thatch- The life span of your respective roof about the tiki bar will definitely be based upon your weather. You can figure on replacing your thatch palms a minimum of every 2 yrs. Sizzling hot that one could eliminate this challenge is to buy top quality commercial synthetic thatch. The buzz of outdoor restaurants with tiki thatch roofs is promoting any excuses for this synthetic thatch. I simply re-thatched my bar with sealed thatch that can present you with an additional Two years of more life.

    Securing Your Bar- Something I would like to mention here, is anchoring your bar down is a must item. I am luckily enough that my bar is located on a concrete apron throughout my pool area. I made use of stop by concrete anchors to avoid my bar from blowing over in high winds.
    More information about tiki bar check out our website

Recent Posts

Skip to toolbar